Chapter 10: Utilities
Diagnostics
Quantum DXi4700 User’s Guide
341
Figure 222:
DSET Page
To generate a DSET report:
1. Click
Generate Report
.
Click
OK
to continue. The system generates a new DSET report. This can take several minutes.
Note:
You may see error or warning messages in the status text as the DSET report is generated.
This is expected and does not indicate a problem with the report.
2. To download the newly generated DSET report, click
Download Report
.
A dialog box displays asking if you want to open or save the file.
3. Click
Save
or
OK
to download the file.
The DSET report is saved as a compressed zip file to the specified location.
4. Locate the DSET report you downloaded and send it to the e-mail or FTP address provided by Quantum
Customer Support.
Healthchecks
The
Healthchecks
page allows you to perform tests that verify the health and integrity of the data
deduplication blockpool. You can also enable and disable healthchecks.
Note:
To configure the DXi4700 to automatically run the healthchecks at specified intervals, use the
Configuration > Scheduler
Scheduling Healthchecks on page 271
).
To access the
Healthchecks
page, on the
Diagnostics
page, click the
Healthchecks
tab.
The
Healthchecks
page contains the following tabs:
General
The
General
page allows you to start running the healthchecks or stop them if they are already running.
When you start the healthchecks, only the healthchecks that are currently enabled are run (see
).
To access the
General
page, on the
Healthchecks
page, click the
General
).
