Quantum DXi4510 User Manual Download Page 259

Page: 259 / 292

Chapter 10: DXi4000 Utilities

Space Reclamation

Quantum DXi4000 User’s Guide

235

Figure 132 Disk Analyzer Page

To perform disk analysis, click

Start

. The throughput result is displayed

under

Result From Last Run

in KB/s.

Note:

It takes approximately 5 seconds to refresh the results.

Space Reclamation

The

Space Reclamation

page allows you to manage space reclamation

activity on the DXi4000. You can start space reclamation and monitor its

progress. You can also schedule space reclamation to occur on a regular

basis.
During space reclamation, the DXi4000 searches the blockpool for tags

that are no longer referenced and then deletes the unneeded tags to

free up space.

Note:

When disk capacity is low, target replication to the system is

paused (see

Replication Service

on page 110). In addition,

space reclamation is automatically started to free up disk

space.

Summary of Contents for DXi4510





































































































































































































































































































Search results

Summary of Contents for DXi4510

Reviews:

Brands by name

Popular brands

Quantum DXi4510, User Manual

Search results

Summary of Contents for DXi4510

Reviews:

Brands by name

Popular brands