Quantum DXi4510, User Manual

Page: 187 / 292

Chapter 9: DXi4000 Configuration
OST
Quantum DXi4000 User’s Guide 163
Figure 91 Add Storage Server
Page
2 Under Add Storage Server , enter information about the storage
server:
• Name - Enter the name of the storage server.
Caution: Do not use an underscore ( _ ) in the name of the
storage server.
• Description - (Optional) Enter a brief description of the storage
server.
• Max Connections - Enter the maximum number of connections
allowed to the storage server (3 to 65536).
Note: Quantum recommends setting Max Connections to
300.
3 Under Logical Storage Unit , select the type of LSU to add to the
new storage server:
• Available Capacity - (Recommended for best performance)
Select this option to add an LSU that uses the available capacity
on the system.
You cannot add an available capacity LSU to a storage server
that already contains an LSU. Also, if you add an available
capacity LSU to a storage server, you cannot add additional LSUs
to that same storage server.