Quantum DXi4510 User Manual Download Page 103

Page: 103 / 292

Chapter 5: DXi4000 Home Page

Scheduled Activity Overview

Quantum DXi4000 User’s Guide

Figure 47 Current Activity
Overview

Scheduled Activity Overview

The

Scheduled Activity

overview on the

Home

page (see

Figure 48

)

displays the following information about scheduled system activity:

•

Space Reclamation Schedule

- The schedule for space reclamation

activity. Click to configure a space reclamation schedule (see

Schedule

on page 237).

•

NAS Replication

- NAS shares scheduled for replication.

•

Scheduled Shares

- The number of shares scheduled for

replication. Click to configure a share for scheduled replication

(see

Configuring a Replication Schedule For a Share

page 93).

Click

Show More

to display additional information:

•

Name

- The name of the NAS share scheduled for replication.

•

Schedule

- The schedule for replication of the NAS share.

Summary of Contents for DXi4510





































































































































































































































































































Search results

Summary of Contents for DXi4510

Reviews:

Brands by name

Popular brands

Quantum DXi4510, User Manual

Search results

Summary of Contents for DXi4510

Reviews:

Brands by name

Popular brands