10
Installing the DXi3500/DXi5500 System
DXi3500 and DXi5500 Quick Start Guide
Figure 5 Assembling the Rack
Rails
2
Install the left and right chassis support brackets at the beginning of a hole pattern
Locating the Mounting Position
) and secure as follows (see
•
DXi3500
- One 10-32 x .25 in. Slotted screw and a three hole nut plate on each rail
at the front and back of the rack. 10-32 x .25 in. PHILLIPS screws and nuts are also
provided for racks with threaded holes (M5 x 32 metric also provided).
•
DXi5500
- Two 10-32 x .50 in. PHILLIPS screws on each rail at the front and back of
the rack for the DXi5500 (M5 x 32 metric also provided).
Note:
The support brackets extend to accommodate rack depths of 30 to 36 in.
(76.2 to 91.4 cm).
Note:
The DXi3500 support brackets must be installed on the inside rack rails.
DXi3500:
The brackets are
secured with four #8 PHILLIPS
screws and four nuts.
DXi3500
: Bracket (short brackets
pre installed)
DXi5500:
Adjustment screws;
adjusts to the depth
of your rack
DXi5500:
Front mounting
bracket preset. Ensure the
screws are in the correct
position.
DXi5
500 r
ack r
ails
DXi3
500 r
ack r
ails
