Quantum ATL SuperLoader ATL, User Manual

Page: 70 / 196

Chapter 3 Media Changer Commands
Log Sense Command (4Dh)
52 Quantum ATL SuperLoader Software Interface Guide
TapeAlert Page
(2Eh)
3
The TapeAlert Log page defines error and informational flags for
detailed device diagnostics. The TapeAlert data is event-based and
the page control bits in the LOG SENSE command are not
applicable and are ignored.
The SuperLoader LTO supports the definition of the flags for
media changer devices as defined in SMC-2.
The SuperLoader DLT only supports the reporting of the
TapeAlert Log page on logical unit 0. It supports the combined
drive and media changer flags are defined in SSC-2.
Figure 21 TapeAlert
Log Sense Header
Format
LP List Parameter. This bit is set to 1.
Parameter
Length
The length in bytes of the following parameter
value.
ASCII Strong for
Event n
The text includes the time of the event, the error
code indentifying the event, and additional data
specific to the event.
Bit
Byte
7 6 5 4 3 2 1 0
0
Page Code (2Eh)
Field Name Description