Quantum ATL SuperLoader ATL, User Manual

Page: 165 / 196

Chapter 3 Media Changer Commands
Report Device Identifier Command (A3h)
Quantum ATL SuperLoader Software Interface Guide 147
Table 62 Report
Device Identifier
Parameter Data
Field Description
Identifier
Length
Specifies the length in bytes of the Identifier field. If the
Allocation Length field in the CDB is too small to transfer
all of the identifier, the length is not adjusted to reflect the
truncation. The identifier length is initially equal to zero,
and is changed only by a successful SET DEVICE
IDENTIFIER command.
Identifier The value reported is the last value written by a
successful SET DEVICE IDENTIFIER command. The
value of the identifier is changed only by a successful SET
DEVICE IDENTIFIER command. The identifier value
persists through resets, and power cycles.