Quantum ATL M1500, User Manual

Page: 86 / 222

Chapter 3 Changing the Library Configuration
Changing the Auto-Import Option
68 ATL M-Series User’s Guide
Changing the Auto-Import Option
3
The
Auto-Import
option controls how cartridges are moved from the
import/export slots of the mailbox to the magazine slots:
• Enabling this option causes the library to move any cartridges in the
import/export slots to the first (lowest element address) free
magazine slots automatically. The move is performed automatically
(without need for host commands) at both power-up and whenever
the import/export magazine is inserted.
• Disabling this option removes the above capability; the host software
must issue SCSI commands to move cartridges from the import/
export slots to the required magazine slots.
To change the
Auto-Import
setting:
1
Access the
Configuration
screen (see Accessing the Configuration
Screen on page 49).
2
Press the
Up
or
Down
buttons until
Auto-Import
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Auto-Import
setting.
The available settings are
Enabled
or
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the option
setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Note:
The default setting is
Disabled
.
Note:
You must reboot the library before this setting will take
effect.