Quantum ATL M1500, User Manual

Page: 57 / 222

Chapter 2 Basic Operations
Removing the Magazines
ATL M-Series User’s Guide 39
2
Press the button corresponding to the magazine access door you
want to open:
• To release the top left magazine access door, press
1
.
• To release both left magazine access doors, press
1 & 2
.
• To release the right magazine access door, press
3
.
• To release all the magazine access doors, press
All
.
3
Press the button next to the desired magazine access door and open
the door.
4
Grasp the handle at the front of the desired magazine and pull it
forward and out of the library.
5
When you are finished adding or removing cartridges from the
magazine, replace it in the library and close the magazine access
door.
6
On the
Release Magazines
screen, press
Re-Lock
.
The library locks the magazine access doors and inventories the
magazines. When the inventory is complete, the GUI displays the
main screen.
Removing a Magazine When the ATL M2500 Library Is
Powered Down
2
To remove a magazine when the library is powered down:
1
Look through the viewing window and verify that all cartridges are
fully seated either in a magazine slot or in the robotic hand.
Note:
If you are opening the bottom left magazine access door,
open the top left magazine access door first.
Caution:
You can damage the library severely if you try to
remove a magazine when one of the data cartridges is
not fully seated.