Quantum ATL M1500 Unpacking Instructions
Document 6421002-06 A01
July 2003
Introduction
3
Introduction
0
This document explains how to unpack a Quantum ATL M1500. The
unpacking procedure consists of the following major steps:
• Removing the library from the shipping carton
• Removing the remaining packing materials
• Checking the contents
Removing the Library from the Shipping Carton
0
To unpack the library:
1
The following tools are required for this operation:
• Scissors
• No. 2 POZIDRIV
®
screwdriver, long (10 in. or 250 mm
minimum)
• Antistatic wrist strap
2
Place the shipping carton and pallet as close to the installation site
as possible.
3
Using the scissors, carefully cut the two plastic straps securing the
shipping carton to the pallet (see
).
4
Lift the lid off of the shipping carton.
Note:
Be careful not to damage the packaging materials while
unpacking the library. Save all packaging materials for
possible future use.
Warning:
The shipping carton is secured to the pallet by two
plastic straps. The straps are under tension and snap
away when cut.
