Quantum ATL M-Series, User Manual

Page: 81 / 222

Chapter 3 Changing the Library Configuration
Changing the Short Labels Setting
ATL M-Series User’s Guide 63
Changing the Short Labels Setting
3
The
Short Labels
option controls how many bar code label
characters are returned when the host issues a
Read Element
Status
command. When
Short Labels
is set to:
•
Off
, all of the bar code label characters are returned
•
On
, only the first six characters of the bar code label are
returned
To enable or disable
Short Labels
:
1
Access the
Configuration
screen (see Accessing the
Configuration Screen on page 53).
2
Press the
Up
or
Down
buttons until
Short Labels
is highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Short Labels
setting. The available settings are
Enabled
and
Disabled
.
5
Press
Select
.
6
To return to the
Configuration
screen without changing the
option setting, press
Cancel
.
7
Press
Main
to return to the main screen.
Note:
The default setting is
Disabled
.
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.