Quantum ATL M-Series, User Manual

Page: 79 / 222

Chapter 3 Changing the Library Configuration
Changing the Wide Negotiation Setting
ATL M-Series User’s Guide 61
Changing the Wide Negotiation Setting
3
The
Wide Negotiation
option controls whether the library robotics
negotiates wide data transfer mode. Normally, this negotiation is
performed by the host.
To enable or disable
Wide Negotiation
:
1
Access the
Configuration
screen (see Accessing the
Configuration Screen on page 53).
2
Press the
Up
or
Down
buttons until
Wide Negotiation
is
highlighted.
3
Press
Select
.
4
Use the
Up
or
Down
buttons to select the desired
Wide
Negotiation
setting. The available settings are
Enabled
and
Disabled
.
5
Press
Select
.
To return to the
Configuration
screen without changing the
option setting, press
Cancel
.
6
Press
Main
to return to the main screen.
Note:
This option does not enable or disable wide data
transfers; it only controls the ability of the library to
negotiate for such transfers.
Note:
The default setting is
Enabled
.
Caution:
If you do not return to the main screen after
changing this setting, your change will not be
saved to NVRAM.