Quantum ATL M-Series, User Manual

Page: 60 / 222

Chapter 2 Basic Operations
Removing the Magazines
42 ATL M-Series User’s Guide
2
Press the button corresponding to the magazine access door
you want to open:
• To release the top left magazine access door, press
1
.
• To release both left magazine access doors, press
1 & 2
.
• To release the right magazine access door, press
3
.
• To release all the magazine access doors, press
All
.
3
Press the button next to the desired magazine access door and
open the door.
4
Grasp the handle at the front of the desired magazine and pull
it forward and out of the library.
5
When you are finished adding or removing cartridges from the
magazine, replace it in the library and close the magazine
access door.
6
On the
Release Magazines
screen, press
Re-Lock
.
The library locks the magazine access doors and inventories
the magazines. When the inventory is complete, the GUI
displays the main screen.
Removing a Magazine When the ATL M2500 Library Is
Powered Down
2
To remove a magazine when the library is powered down:
1
Look through the viewing window and verify that all
cartridges are fully seated either in a magazine slot or in the
robotic hand.
Note:
If you are opening the bottom left magazine access
door, open the top left magazine access door first.
Caution:
You can damage the library severely if you try to
remove a magazine when one of the data
cartridges is not fully seated.