background image

QE7040 

 

 

 

USER INSTRUCTIONS 

CERAMIC ELEMENT ROOM HEATER WITH REMOTE CONTROL AND IONIZER 

 

MODEL No. QE-7040 

 

Thank You very much for your custom  

 

You have purchased one of the most modern and reliable electrical appliances currently available, which we know will 
give you long and reliable service.  
 
As with all electrical appliances, it is important that all safeguards are followed. We therefore ask you to read through 
these instructions carefully and to keep them in a safe place for future reference. 
 
This manual can be downloaded from the Quantum Ecoelec website at  
 

www.quantum-ecoelec.com/support

 

 

IN THE BOX 

 

Along with these instructions

 

the box should also contain the following items 

 
The most important item is a QE-7040 wall heater 
1 - Remote control 
2 - Woodscrews, 35 mm long 
2 - plastic wall-plugs used for fixing the heater to a brick or concrete wall 
 
If there is anything missing or you have any questions, please call 05602-045420 between 8:00am and 4:00pm Mon to 
Fri and we will do our best to help you.  
 
We can be contacted by email at:-  

[email protected] 

 

CONFORMITY 

 
This product is CE, TÜV & RoHS marked and conforms to these standards. 
 

ENVIRONMENTAL PROCTECTION 

 

 
European directive 2002/96/EC on waste electrical and electronic equipment (WEEE), requires that 
old household electrical appliances must not be disposed of in the normal unsorted household waste. 
Please recycle where facilities exist.  
 

Check with your local Authority on recycling advice and disposal sites in your area. 

 
 
 

Summary of Contents for QE-7040

Page 1: ...x should also contain the following items The most important item is a QE 7040 wall heater 1 Remote control 2 Woodscrews 35 mm long 2 plastic wall plugs used for fixing the heater to a brick or concrete wall If there is anything missing or you have any questions please call 05602 045420 between 8 00am and 4 00pm Mon to Fri and we will do our best to help you We can be contacted by email at support...

Page 2: ...the terminal marked L LOAD Green Yellow wire must be connected to the terminal E or marked ALL ELECTRICAL WORK SHOULD BE CARRIED OUT BY A COMPETENT ELECTRICIAN No 8 Woodscrews supplied Fit the screws leaving the screws protruding 15mm from the wall Mark the position on the wall for the 13A Fused Spur connection and supply cable Surface mount or sunken Mount the heater on to the 2 off No 8 Woodscre...

Page 3: ...n on the remote control to switch on the FAN and open the vanes Pressing the HEATER button will select the low heat setting 1000W Press the HEATER button to select the high heat setting 2000W The ambient temperature of the room can be controlled from 18C to 30C by pressing the UP or DOWN to select the required temperature The timer can be set from hour to 7 hours by pressing the TIMER button which...

Page 4: ...vicinity of bathtubs showers wash basins or swimming pools Do not leave switched on unattended overnight Do not use outdoors Do not use this appliance for other than its intended purpose This appliance is for interior use only Do not attempt to repair disassemble or modify the appliance in any way There are no user serviceable parts inside Do not insert or allow to be inserted any foreign objects ...

Reviews: