
Manual for KD7E/333 series
Chapter 2
Wake-Up On Internal Modem (WOM)
Through the Wake-Up On Internal Modem function, the system which is in the suspend or
soft-off status can be waked up by a ring signal received from internal modem. If this
function is to be used, be sure an internal modem card which supports the function is used.
Then connect this header to the relevant connector on the modem card, set Wake up on
LAN/Ring as Enabled in the POWER MANAGEMENT SETUP section of the BIOS. Save &
exit, then boot the operating system once to make sure this function takes effect.
Internal Audio Connectors (AUX, CD_IN, MODEM)
(Available on KuDoz 7E/333-A/-C)
AUX and CD_IN connectors allow you to receive audio input from such sound sources
as a CDROM, TV tuner, or MPEG card. The MODEM connector allows the onboard
audio to interface with a voice modem card with a similar connector. It allows connecting
the mono_in (such as a phone) or mono_out (such as a speaker) between the onboard
audio and the voice modem card.
1
+5VSB
GND
Signal for waking up
Common
Mono-Out (to Modem)
GND
MODEM
CD_IN
1
Phone-In (from Modem)
Right Channel
AUX
GND
1
Left Channel
Right Channel
1
Left Channel