Quantum Data 881 User Manual Download Page 318

Page: 318 / 1144

306

Chapter 9

Testing HDMI Sink Devices

To inject external audio into the HDMI stream:

•

If you have the 882CA analyzer option you will have the VGA-to-RCA cable (part

30-00150). Connect the AV connector to the 882’s SPDIF / AV port. Then connect the

black RCA connector to the SPDIF output of the external audio source.

•

If you have the 882C without the analyzer option, you will have the VGA-to-RCA cable

(part 30-00148). Connect the AV connector to the 882’s SPDIF / AV port. Then connect

the red RCA connector to the SPDIF output of the external audio source.

•

If you have the 882E, you will have the (30-00123) BNC to RCA adapter (provided) so

you will need a standard RCA cable. Simply connect the RCA cable from the SPDIF IN

connect to the SPDIF output of the external audio source.

To test an HDMI display using HDMI audio from an external source:

1. Set up the 882 for HDMI output. See “

Setting up the 882 for HDMI testing

” on page 259.

2. Connect the external audio source to the SPDIF-A/V connector on the 882 as follows:

For the 882CA, using the RCA-to-VGA cable provided with the 882, connect the J1

connector to the SPDIF-A/V connector on the 882. Then connect the red RCA

connector to the external audio source.

For the 882E, connect the external audio source to the SPDIF-A/V connector on

the 882 using the BNC to RCA adapter provided with the 882.

3. Press the

Source

key and select a format suitable for the HDMI display (for example,

DMT0660).

Alternatively, to select the format using the command line interface, enter the following

commands:

FMTP

/tffs0/Library/Formats // Set format path to 882 memory

FMTL

DMT0660

// Loads the DMT0660 format

FMTU

// Activates the DMT0660 format

To a

dio player

To a

dio so

rce

Red

Green

Grey

Black

To AV

connector

To a

dio so

rce

To AV

connector

Red

Summary of Contents for 881

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands

Quantum Data 881, User Manual

Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands