Quantum Data 881 User Manual Download Page 253

Page: 253 / 1144

882 Video Test Instrument User Guide

(Rev A.35)

241

Running a test sequence

Test sequences are initiated through the generator’s front panel or the command line

interface. A sequence can run in one of three modes:

•

Step and stop mode, where the progression of the sequence is under user control, and

the sequence halts after the final step.

•

Step and wrap mode, where the progression of the sequence is under user control, and

it continuously loops (repeats the sequence steps).

•

Automatic mode, which enables automatic progression through the sequence list with

continuous looping.

The instructions for running test sequences using the front panel and command line

interface are provided below.

Running a test sequence using the front panel

To run a sequence using the front panel:

1. Press the

Tools

key. The Tools menu appears as shown below:

2. Choose the

Sequence

item by pressing the adjacent soft key. To see all of the

sequences, press the + and - keys.

System

Sequence
Probe
AFC

Probe

NewSeq

Analog

Myseq_01 Myseq_02
Myseq_03

Myseq_04

Myseq_05

Myseq_06

Summary of Contents for 881

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands

Quantum Data 881, User Manual

Search results

Summary of Contents for 881

Reviews:

Related manuals for 881

Brands by name

Popular brands