Quantronix CubiScan 125, Operation And Technical Manual, Page: 34 / 124

Connecting to a Computer or Network Setup
24
CubiScan 125
Installing and
Configuring the
USB Driver
You must install a driver on your computer before it can recognize
and communicate with the CubiScan 125 via the USB port. A
CD-ROM is provided with the CubiScan 125 containing an execut-
able file to load the USB driver. Complete the following steps to
install the driver.
The following instructions use screen illustrations from Microsoft
Windows XP. If your computer has a different operating system, the
screens may not look exactly like those shown, but the instructions
are the same.
1. Execute the file, USB Driver CS125.exe on the CD-ROM. A Zip
Self-Extractor dialog box is displayed.
2. Select
UnZip
. The CubiScan 125 USB driver files are copied to
the folder C:\Program Files\CubiScan125USB .
3. With the CubiScan 125 turned on, connect the USB cable to
your computer’s USB port and to the USB port on the CubiScan
125. In the bottom right-hand corner of the monitor, a bubble
appears indicating that new hardware has been found.