Quantifi Photonics SLED 1000 Series, User Manual

Page: 43 / 61

9.7 Command descriptions
9.7.1 Common commands
Command
*CLS
Summary >>
Syntax
*CLS
>>
Description Clear session message queues
Parameters N/A
Response N/A
Example
*CLS
Command
*IDN?
Summary >>
Syntax
*IDN?
>>
Description Query the CohesionSCPI service identification
Parameters N/A
Response Comma separated string with the <manufacturer>,<server name>,<chassis controller name>,<server version>
Example
*IDN? -> Quantifi Photonics, CohesionSCPI service, PXIE-8133, FW2.0.15
Command *OPC? Summary >>
Syntax
*OPC?
>>
Description Query the Operation Complete Status
Parameters
Response
1
: all modules installed in the chassis are ready to execute commands
0
: modules installed in the chassis still have commands to execute in the input queue
NOTE: Any commands sent to the module when
:MODUle<slot>:OPC?
is NOT equal
1
, may not execute or
return an error.
Example *OPC? -> 1
Command *OPT? Summary >>
Syntax
*OPT?
>>
Description Query the modules managed by the CohesionSCPI service
Parameters N/A
Response Comma separated string of the installed modules in the chassis
Example
*OPT? -> ,Switch-1002-2-FA-PXIe,Switch-1003-1-FC-PXIe,,VOA-1001-2-FA-PXIe,,,,O2E-1001-
1-FC-PXIe,,,,,,,,,
Quantifi Photonics | SLED 1000 / 1300 Series PXIe User Manual | Document version 1.08
43 / 61