Quantifi Photonics IQTX 1100 Series User Manual Download Page 18 | Manualshive

Page: 18 / 75

Quantifi Photonics IQTX 1100 Series User Manual Download Page 18

Coherent Modulation Transmitter | IQTX

Quantifi Photonics Ltd.

Version

1.04

18

7

Installing software

Installing Cohesion Operator software package on client computer(s)

Set up any computer you use to connect with the instrument by installing the latest Cohesion Operator
software package. Cohesion Operator enables you to connect with Quantifi Photonics instruments on

your network and manage firmware upgrades.

The package is included on the USB media device that we provide with your instrument, or you can
download it from quantifiphotonics.com (go to Resources > Drivers, software and manuals > EPIQ

Series).

If another IQTX instrument is already connected to the client computer over USB, consult the
Network and Update settings on configuring the Ethernet / USB IP address for multi-instrument
control.

To install the software package on a client computer:

•

(recommended) Save your work and close all programs.

•

If using the USB media device, insert it on the computer.

•

Double-click CohesionOperator-<version>.exe and follow the prompts.

A Windows Security Alert may prompt you to allow network access. We recommend that you
allow access to both, private and public networks, to enable any network configuration.
The installation wizard will install required drivers, applications, and desktop icons on the
computer.

To open the Cohesion Operator application:

•

Double-click the Cohesion Operator desktop icon or open Cohesion Operator from the Start
menu.

From Cohesion Operator you can:

1.

Select a Quantifi Photonics instrument that is available on your network.

2.

Validate the IP address of the instrument and retrieve instrument information (refer 0).

3.

Communicate with the instrument through the SCPI Command Console (refer 11.7).

4.

Access the instrument through CohesionUI, a web-based graphical user interface (refer 8.1).

5.

Upgrade instrument firmware (refer 7.3).

6.

Restore the instrument to factory settings (refer 7.4).

«
...
16
17
18
19
20
...
»

Summary of Contents for IQTX 1100 Series












































































Reviews:

No comments