Quantifi Photonics 1000 Series, User Manual, Page: 43 / 59

Automated Optical Switch | Switch 1000/1100/1400 Series
Quantifi Photonics Ltd. Version 3.04 43
0
is returned if any module installed in the chassis still has a command to execute in the
input queue
Example *OPC? -> 1
Command
*OPT?
Syntax *OPT?
Description Query the modules managed by the CohesionSCPI service
Parameters No parameters
Response Response will be a comma separated string of the installed modules in the chassis
Example
*OPT? -> ,SwitchPXIe-1002-2-FA,SwitchPXIe-1003-1-FC,,VOAPXIe-1001-2-
FA,,,,O2EPXIe-1001-1-FC,,,,,,,,,
Specific command summary
Slot commands Description
:SLOT<n>
:OPC?
:OPTions?
:IDN?
- Query the status of the Operation Complete bit
- Query the modules installed on the slot
- Query the Identifier for the slot; returns the manufacturer, part number,
serial number, hardware and firmware versions
Configuration commands Description
:ROUTe<n>
:ERROR?
:CHANnel<m>
:ERROR?
:STATE/?
- Query the error status of the Switch
- Query the error status of the specified channel of the Switch
- Set or query the routing state of the Switch
Specific command descriptions
9.5.1 Slot comm a nds
Command
:SLOT<n>:OPC?
Syntax :SLOT<n>:OPC?
Description Query the status of the Operation Complete bit
Parameters No parameters
Response
1
is returned if the module is ready to execute a new operation
0
is returned if the module is busy
Example :SLOT1:OPC? -> 1
Command
:SLOT<n>:OPTions?
Syntax :SLOT<n>:OPTions?
Description Query the modules installed on the slot
Parameters No parameters
Response
The response will be a comma separated string of detectors installed in the Switch. If a
module is not installed in a channel, it will not return any identification string
Example :SLOT3:OPT? -> 1,,
Command
:SLOT<n>:IDN?
Syntax
:SLOT<n>:IDN?
Description
Query the Identifier for the slot; returns the manufacturer, part number, serial number,
hardware and firmware versions