Automated Optical Switch | Switch 1000/1100/1400 Series
Quantifi Photonics Ltd.
Version
3.04
29
Modules list
All the installed modules are displayed on the HOME page. To access the controls for a module, click the
corresponding module name, or hover over the MODULES button and select a module from the
displayed list. Controls for a specific module, or a channel in a module are then displayed.
7.4.1
Set and Actual values
Some Quantifi Photonics products
will allow the user to set a given parameter’s value and then read
that parameter (eg. Laser, VOA, O2E, etc). In order to help the user to distinguish between a set value
and an actual read value, CohesionUI will format these values differently according to the legend in the
top right corner of the window.
•
ACTUAL
: the actual value of the parameter, defined by querying the module
•
SET
: the intended value of a given parameter, defined by user input
In the following example, the POWER is
SET
to
10.00 dBm
, but the
ACTUAL
value is
-16.02 dBm
. Thus, the
user can see both the current and user defined value of a given parameter.
The
SET
and
ACTUAL
values are only displayed for appropriate parameters which require user input.
For parameters that report a value and do not depend on user input, only an
ACTUAL
value is displayed.
Summary of Contents for 1000 Series
Page 1: ......
Page 59: ...3 04...