background image

 

 

I

Copyright

Copyright © 2013 Quanta Computer Inc. This publication, including all photographs, illus-
trations and software, is protected under international copyright laws, with all rights 
reserved. Neither this technical guide, nor any of the material contained herein, may be 
reproduced without the express written consent of the manufacturer. All trademarks and 
logos are copyrights of their respective owners.

Version 1.0 /  January 6, 2014

Disclaimer

The information in this document is subject to change without notice. The manufacturer 
makes no representations or warranties with respect to the contents hereof and specifi-
cally disclaims any implied warranties of merchantability or fitness for any particular pur-
pose. Furthermore, the manufacturer reserves the right to revise this publication and to 
make changes from time to time in the content hereof without obligation of the manufac-
turer to notify any person of such revision or changes.

For the latest information and updates please see 

www.QuantaQCT.com

All the illustrations in this technical guide are for reference only and are subject to change 
without prior notice.

Summary of Contents for Rackgo X Series F03A



































































































































































Reviews: