BMC
SNMP
3-60
2. Enable the
Local Media Support
if needed.
3. Click
Save
to save the changes made else click Reset to reset the previously saved
values.
SNMP
This page is used to set the configuration for SNMP. User could set the SNMP community
string and trap in this page. It just display when the project support SNMP.
General support as below:
The following fields are displayed in this page.
UTC Timezone
Note:
Maximum of two devices can be added in Floppy, CD/DVD and Hard disk drives.
Note:
If there are two device panels for each device, and when you click the Connect button, then
the redirected device panel will be disabled.
Table 28: SNMP Settings
I
TEM
D
ESCRIPTION
Enable SNMPv1/v2
The selection enable or disable the SNMP feature for query.
Read-Only Community String
Display or set the read-only community string.
Read-Write Community String
Display or set the read-write community string.
Note:
The feature “UTC Timezone” used for port setting supported from Grantley platform.
