Quanta Computer CTL GQE10C Series, User Manual

Page: 14 / 30

Connecting a display device
You can connect a display panel or projector to your system
that has the following connectors:
•
HDMI connector
• DisplayPort (USB Type-C™)
To establish the HDMI connection, you need to use an HDMI
cable (not supplied).
1. Connect one end of the HDMI cable to the HDMI port of your
CTL Meet Compute System.
2. Connect the other end of the HDMI cable to the HDMI port of a
display device, for example monitor.
Connecting a mouse and keyboard
Connect the USB mouse and USB keyboard to the USB ports of your CTL
Meet Compute System on the rear side of your system.
» NOTE:
After you power on the CTL Meet Compute System, the wireless mouse
and keyboard are usually paired automatically. If any additional steps are
required, please refer to the manual that came with your accessories.
14
GETTING STARTED