Chapter 3
19
OPM Series User’s Manual
Step 2
: Insert the monitor into the cutout of the fixture from the front side.
Step 3
: Fasten 14 screws from the front side. (4 on top / bottom, 3 on right / left edges
respectively)
Figure 6 Open frame mount (front mount) and cut-out hole
Rear Mount (Inside Mount)
15.6" Model
Step 1
: Make a cutout on the fixture, eg. wall. (Cutout: 347.16 x 196.59 mm based on
active area of the panel)
Step 2
: Align the active area of the panel with the cutout of the fixture from the rear
side.
Step 3
: Fasten 14 screws from the rear side. (4 on top / bottom, 3 on right / left edges
respectively)
18.5" Model