Chapter 1
KUBE-8090 User’s Manual
16
Humidity
Storage: -20°C to 80°C, 0%-90%, non-condensing
Mounting
Optional VESA-mount and Wall-Mount
Certifications
CE, FCC Class A
Table 1 KUBE-8090 Specification
System tour
Refer to the figures below to identify the components of the system.
Front Panel
Figure 1 Front Panel
Power Switch
The power push button allows powering ON and OFF the system.
Clear CMOS Button
To clear the CMOS, use the tip of a pen to press the button briefly (for less than
three seconds).
Power LED (Blue)
The power LED will light when the PC is power-on.
HDD LED (Red)
The hard disk LED blinks when data is being written into or read from the HDD.
WiFi LED (Green)
When the data is Transferring, the WiFi LED will blink.
