Chapter 3
20
KPC-1920 User’s Manual
Chapter 3
Getting Started
Power Connection
AC Power
CAUTION
Use the power cord suitable for the power supply in your country. Do not
remove or alter the grounding prong on the power cord. In situations where
a two-slot receptacle is present, have it replaced with a properly grounded
three-prong grounding type receptacle.
Connect the supplied the AC/DC adapter to the system by inserting the DC connector
of the adapter into DC power inlet on the I/O panel of the system as shown. Secure
the connector by tightening the knurled screw on the DC connector.
Figure 8 DC power inlet location
