Chapter 2
18
KPC-1920 User’s Manual
Chapter 2
Assembly/Disassembly
Mounting
WARNING
Before opening your system, make sure to turn it off and disconnect the
power sources to prevent electric shock or system damage.
The KPC-1920 comes with VESA FDMI 100 standard mounting holes as shown
below. Use M4x0.7 metric machine screws with the appropriate length for your
mounting bracket. The available internal clearance for the mounting screws is 8mm.
Figure 4 Mounting hole locations on the KPC-1920
Desktop Mounting
The KPC-1920 comes with a desktop mounting bracket. Attach the base to the
bracket spine using the single large screw provided and a flathead screwdriver as
shown.
