CLOCK77/PCI CLOCK77/USB CLOCK77/ISA
25
© QUANCOM Informationssysteme GmbH
4.3
Installing the CLOCK77/ISA
The installation of the drivers has to be done with the rights of the
system-administrator. If you don’t own such rights, contact your system
administrator.
1. Step : installation of the drivers:
To install the drivers of the ISA-card insert the Clock-Installation- CD into your
CD-ROM-drive and click on ”Start | Settings | Control Panel”.
·
Double-click on “Hardware”
·
Choose ”Next”
·
Now choose ”Add a new device” and click on ”Next”.
·
In the following window chose ”No, select device from list” and go on with ”Next”.
·
From the shown list chose ”other devices” and click on ”Next”.
·
Now click on “Disk” and then on “Browse”
·
Now choose CLK77ISA.INF from the folder WIN-XP-2000 on the Installation-CD and
continue with “Open”.
·
Commit the following Window with “OK”.
·
Now choose “CLOCK77/ISA” and click on “Next”.
·
The drivers for the interface-board will be installed after you click on ”Next”.
·
After the files were copied and the drivers registered, the installation will be closed with “
Finish”.
·
You now may reboot your system to ensure that all drivers are loaded properly.
1. Step: Software Installation:
