Table 5-2 A/D Converter Inputs
5.4.10 The Private\Display Locations Menu
P..Display Locations
Location: llllll
Accessable: FALSE
Access.Valid:FALSE
Barcodeable: FALSE
Label: ??????????
Label Error: FALSE
Label Valid: FALSE
Occupied: FALSE
Occup.Valid: FALSE
On My Side: FALSE
Present: FALSE
Pres. Valid: FALSE
Source Valid:FALSE
Source Loc.:llllll
Synchronized:FALSE
Type: DRIVE
Tape Ejected:FALSE
NOTE
The Tape Ejected item only appears in the menu if the Type menu item is DRIVE.
The Display Locations menu contains data from the library’s internal inventory data-
base. The data in this menu differs from the data found in the
Operation\
Element Status\Display
menu, because it pertains to the library’s physical
world and does not contain references to SCSI element addresses.
The only editable value in this menu is the
Location
value, which corresponds to a
physical location. Once a
Location
is selected, all the internal database information
for that location is displayed as follows:
501380 Rev. B
The Private Menu
5-17
