5.
Turn the I/O port assembly over and connect the LEDs cable. Note that the con-
nector is keyed for correct orientation.
6.
Reinstall the I/O port assembly (Section 7.9.2).
7.
Recalibrate the TLS. (See Section 5.3.2 for details.)
7.11 Switch Bracket Assembly (Front Panel)
P/N 500815-01-4
Tools Required:
•
1/4-inch Hex Nutdriver or Wrench
Material Required:
•
3-inch x 3/32-inch Cable Ties
Spring Finger
Top Mounting Nuts (2)
Front Panel Display
Lower Mounting Nuts (4)
Figure 7-22 The Switch Bracket Assembly (Front Panel)
7.11.1 Switch Bracket Assembly Removal
1.
Turn off the TLS power and remove the power cord.
2.
Open the cabinet door.
501380 Rev. B
Field–Replaceable Units (FRUs)
7-33
