Help: 888-426-5001
QualityWaterForLess.com
t u r b I n e
Pa d d l e
f I G u r e 17- a
f I G u r e 17- c
f I G u r e 17- b
19) The display may now show
FM / t0.7
as shown
in Figure 17-A. This indicates Flow Meter type
3/4” Turbine. Set the setting to t0.7 if you have
the 3/4” turbine meter or P0.7 for the 3/4” paddle
wheel meter. Press the REGEN button to ad-
vance to the home screen
20) The system will now exit Master Programming
mode and the display should now show the time
of day followed by the number of gallons remain-
ing. Now change the time of day to your current
time with either the UP or DOWN button.
Be
careful to note the presence or absence of the
PM indicator in the top right corner
. Confirm
the time with the REGEN button (Figure 17-B)
21) Finally, replace the valve cover and tighten the valve
cover screw to cover the valve and finish program-
ming. Make sure the lip of the cover rests on the
shelf of the uncovered valve as you are closing it as
seen in Figure 17-C