Maintenance
11
Please check that the projector mount is secure and safe to use at regular intervals. If you have any
questions regarding any of the instructions or warnings, please contact your local distributor (OR)
contact QualGear technical support via email at [email protected].
5 Year Limited Warranty
Version September 2015
5 Year Limited Warranty
Version September 2015
QG-PM-FT1-WHT
www.qualgear.com
ADJUSTABLES:
Vertical Tilt, Horizontal Roll, and
Horizontal Rotation: +/- 5 degrees
Horizontal Slide (Forward/Backward): 358 – 658mm,
from the center of the wall plate
Horizontal Slide (Left/Right): 90mm
CAUTION!
Do not exceed the maximum rated weight
specified. Otherwise, serious injury or
property damage may occur.
PROJECTOR WALL MOUNT
INSTALLATION MANUAL
Installing the Wall Plate Covers and the Decorative Cover
7
Adjusting the Forward/Backward Slide
Locking Screws
W-
D
-5°
-5°
5°
5°
[Projector not included]
[Projector not included]
(33lbs)
RATED
15kg
(33lbs)
RATED
15kg
Wall Plate Cover
Connect the cables to the projector, and install
the wall plate covers and the decorative cover.
Decorative Cover
