Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.2.x)
34
Attention:
Pressing the
Save
button will stop some vital processes on the Quadro, therefore you will need to reboot your device manually even if
you have cancelled the language pack update procedure on the following steps.
The next page displayed will show verification of the language pack being uploaded and asks for confirmation to overwrite the existing custom
language pack (if applicable). After final confirmation, the system will upload the selected custom Language Pack and it will reboot.
User Rights Management
The
User Rights Management
service sets restrictions on the GUI access for various users, permits or denies the access to certain Web GUI
configuration pages and creates multilevel user management of the Quadro. The feature is useful to the ISPs in order to set the restrictions for
certain customers to manage the Quadro’s configuration.
Two levels of Quadro GUI administration are available:
•
Administrator
– this is the main administrator’s account. The administrator can configure to have the factory reset safe the default
password or choose not to. The administrator has access to all Web GUI pages and no one else has configuration permission to adjust
this account. The administrator is responsible for granting access to all other user groups.
•
Local Administrator
– this is a common (sub-) administrator’s account. The password is not factory reset safe. Local Administrator can
have permission to adjust each GUI page.
•
Extension
– this account refers to all extensions created on the Quadro. The password for default extensions is not factory reset safe
but is contained in the backed up configuration. Permissions for an extension to access each GUI page can be adjusted here.
The
User Rights Management
page consists of two pages.
The
Users
page is used to manage the available users on the
Quadro. The
Roles
page is used to assign the corresponding
permissions to the users.
The
Users
page contains a table where the Administrator and
Local Administrator users are listed. This page allows them to
modify the passwords of available users in the table and to
manage the Local Administrator’s account. The following
functional buttons are available on this page:
The
Change Password
functional button is used to change
the password of the Administrator and Local Administrator
user’s account. Select one of the available users in the table
by toggling the corresponding checkbox and press
Change
Password
to open the corresponding page.
Fig. II-60: Users page at User Rights Management
The
Change Password
page is used to change the user’s password.
The
GUI Access Password
offers the following components:
The
Old Password
text field is only present when
modifying the Administrator account password and requires
the current password of the Administrator. An error
message prevents entering the wrong password.
The
New Password
text field requires a new password for
the Administrator or Local Administrator. Reentering the
new password in the
Confirm New Password
text field will
confirm the new password.
Fig. II-61: Change Password page
Please note
:
The password can consist of numeric values and symbols. Up to twenty (0-20) digits and symbols are allowed.
The
Phone Access Password
offers the following components:
The
Old Password
text field is present when modifying the Administrator account password and requires the current password of the Administrator.
An error message prevents entering the wrong password.
The
New Password
text field requires a new password for the Administrator. Reentering the new password in the
Confirm New Password
text field
will confirm the new password. The password can consist of numeric values only. Up to twenty (0-20) digits are allowed. A corresponding warning
appears if any other symbols are inserted.
The
Enable User
and
Disabled User
functional buttons are used to enable or disable the Local Administrator’s account.
Attention:
It is highly recommended to define a proper and non-empty password on this page if the extension is being used for the Call Relay
service from the Quadro's Auto Attendant.
