Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.2.x)
18
The
SIP Tunnels to Slave Devices
and
SIP Tunnels
to Master Devices
tables list the SIP tunnels between
local and the remote Quadros (see
). The
SIP Tunnels to Slave Devices
table
lists those tunnels where local Quadro acts as a
master. The
SIP Tunnels to Master Devices
table
lists those tunnels where local Quadro acts as a slave.
Fig. II-23: SIP Registration Status page
IP Lines Registration Status
The
IP Line Registration Status
table includes the following
information that may be sorted in ascending or descending order
clicking the columns' headlines: The
IP Lines Registration Status
displays a table with the IP Lines registration information on the Quadro.
The
Registered IP Lines
table lists the IP lines and remote extensions
registered on the Quadro, as well as all SLA lines registered from each
IP phone. The table indicates the actual IP addresses of the remote
devices, the usernames by which the devices have been registered on
the Quadro, as well as the registration status information.
Fig. II-24: IP Lines Registration Status page
License Status
The
License Status
page
displays a table with all available licenses on
the Quadro and the corresponding settings for each license. (Currently
only QCM license status is displayed.)
This page includes the following information:
Type
indicates the type of the license available on the Quadro.
Count
indicates the number of the corresponding licenses available on
the Quadro.
In Use
indicates the number of used licensed from the total available
licenses.
Extension
lists the extensions that are using the corresponding license.
Links in this column move to the corresponding service configuration
page for the extension.
Fig. II-25: License Status page
