6
March 17, 2020
7080-166J
March 19, 2018
QUICK START GUIDE
*Before you plug in this appliance, follow these instructions*
O
pe
ra
tion
Set
U
p
M
an
ual
F
ee
d
1.
Empty fi re box
of component
packet and
any other
debris.
2. Add pellets
and close lid.
65
OFF
8:30 AM
MANUAL FEED
ON
65
48
STANDBY
72
65
STANDBY
Set Temperature
8.
From the home screen press the outer ring to access the set temperature; rotate clockwise to raise
the temperature and counterclockwise to lower the temperature.
NOTE:
Refer to the Quadra-Fire Wireless User Interface manual for more information.
3. Install user interface per
instructions.
4. Plug in the
appliance (
exhaust
blower will run for
about 45 seconds,
wait for it to stop
before moving to
manual feed
).
65
72
HEATING
5.
From the OFF home screen press and hold the outer ring for 3
seconds to access the main menu.
6. Rotate to MANUAL FEED from the main menu and press outer ring
to select.
7.
Rotate to ON, then press outer ring to start.
- The screen will display FEEDING; either wait for MANUAL FEED
to complete or press OFF
to cancel feeding.
- When MANUAL FEED completes the user interface will automatically set
POWER
to
ON
and return to the home screen.
- Refer to Quadra-Fire Wireless User Interface manual for more information.
NOTE:
The MANUAL FEED
menu option is only available when your home screen reads OFF.
NOTE:
MANUAL FEED is required during initial set up of the unit, or after the unit has alarmed out
due to an empty hopper.
C. Quick Start Guide