Quadra-Fire LOGS-291 Placement Instructions Download

Page: 1 / 3

LOG PLACEMENT

INSTRUCTIONS

CAUTION:

Logs are fragile! Carefully remove the logs from the packaging. Pull metal base pan forward

before setting logs in place.

291-935B 4/02

Log Set Assembly: LOGS-291
Model: QV36-A

LOG #1 (SRV537-134):

Place log #1 on the back of the grate, pull forward until it contacts the two rear

locator tabs and place log notch over tab on the right side of the grate.

LOG #2 (SRV537-135):

Align the slot in the left bottom of log #2
with the third grate bar. Slide the log
back until it contacts the two front log
locator tabs.

NOTCH

Summary of Contents for LOGS-291

Page 1: ... Assembly LOGS 291 Model QV36 A LOG 1 SRV537 134 Place log 1 on the back of the grate pull forward until it contacts the two rear locator tabs and place log notch over tab on the right side of the grate LOG 2 SRV537 135 Align the slot in the left bottom of log 2 with the third grate bar Slide the log back until it contacts the two front log locator tabs 1 2 3 4 5 6 7 1 2 NOTCH ...

Page 2: ...5 Place log 5 over log 2 and align with recess in log 2 LOG 3 SRV544 707 Align the slot in the bottom of log 3 with the second grate bar and rest the other end on the burner Be sure the right end of log 3 is pushed back and to the right to contact the locator tab on the burner 3 4 5 ...

Page 3: ...d log 6 LOG 6 SRV537 718 Place the large end of log 6 on the edge of the grate bar and rest the burned end in the slot of log 1 as shown NOTE Log set should look like photos If sooting occurs recheck for accurate log placement If log placement is correct readjust ember material until sooting is eliminated 6 7 ...