background image

4035-161 Rev A

Hearth & Home Technologies Inc.
1445  North Highway, Colville, WA 99114-2008

INSTALLATION & OPERATING

INSTRUCTIONS

GarnetE SERIES

ELECTRIC STOVE

Note: 

Read these instructions completely

before beginning installation. Failure to follow
them could cause  heater malfunction resulting
in serious injury and/or property damage.

WARNING!

Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage. Refer to
this manual. For assistance or additional information, con-
sult a qualified installer.

CAUTION:

Do not expose this heater to the elements
(such as rain, etc.).

SAVE THESE INSTRUCTIONS

WARNING!

Do not modify this heater.  Use it only as described in
this manual.  Any other use not recommended by the
manufacturer may result in fire, electric shock or per-
sonal injury and void the warranty.

WARNING!

All electric heaters have hot and arcing or sparking parts
inside. Do not use it in areas where gasoline, paint or flam-
mable liquids are or stored.  Do not use where the heater
may be exposed to flammable vapors.

WARNING!

This heater is tested and listed for use only with the
optional accessories listed in these instructions. Use
of optional accessories not specifically tested for this
heater could void the heater warranty and/or result in a
safety hazard.

Summary of Contents for GarnetE SERIES













Reviews: