background image

R

www.quadrafire.com

7047-148C

December 20, 2011

OWNER’S MANUAL

Installation and Operation

Model:

51I-ACC

5100-I ACC WOOD INSERT

Automatic Combustion Control (ACC)

DO NOT DISCARD THIS MANUAL

CAUTION

• 

Important  operating 

and  maintenance 

instructions included.

•  Leave this manual with 

party  responsible  for 

use and operation.

•  Read,  understand  and 

follow these instructions 

for safe installation and 

operation.

 WARNING

If the information in these instruc-

tions is not followed exactly, a 

fire may result causing property 

damage, personal injury, or death.

 

•  Do not store or use gasoline or other flam

-

mable vapors and liquids in the vicinity of 

this or any other appliance.

•  Do not overfire - If heater or chimney con

-

nector glows, you are overfiring. Overfiring 

will void your warranty.

•  Comply with all minimum clearances to 

combustibles as specified.  Failure to 

comply may cause house fire.

Fire Risk.

WARNING

For use with solid wood fuel only.

Other fuels may overfire and generate 

poisonous gases (i.e. carbon monoxide).

Installation and service of this appliance should be 

performed by qualified personnel.  Hearth & Home 

Technologies recommends NFI certified profession

-

als, or technicians supervised by an NFI certified 

professional.

WARNING

Hot glass will cause burns.

•  Do not touch glass until it is cooled

•  NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY SUPERVISE children in same room as 

fireplace.

•  Alert  children  and  adults  to  hazards  of  high 

temperatures.

High temperatures may ignite clothing or other 

flammable materials.

•  Keep clothing, furniture, draperies and other flammable 

materials away.

HOT SURFACES!

Glass and other surfaces are 

hot during operation AND 

cool down.

DO NO

T

DISCARD

To obtain a French translation of this manual, please contact your dealer or visit www.quadrafire.com

Pour obtenir une traduction française de ce manuel, s’il vous plaît contacter votre revendeur ou visitez www.

quadrafire.com

NOTE

Summary of Contents for 51I-ACC





















































Reviews: