quadient iX-7PRO Series User Manual Download Page 304

Page: 304 / 564

Postage Imprint Default Settings

10.7

The settings of the postage imprint 'by default' include:

•

Stamp default settings

: sets the default rate, text and slogan for mailing

operations.

•

Automatic Date Advance

: enables early date change to continue printing postage

with the new date after post office closing hours.

•

Printing offset

: sets the default offset print position from the right side of the

envelope.

Stamp Default Settings

You can set default parameters for the stamp elements that follow:

• Rate
• Text
• Slogan

You can create up to nine custom text messages.

On list screens, a mark

indicates the default parameter.

How to Change the Default Rate

Use the procedure below to change the rate the machine activates at start-up.

To change the default rate:
1.

As supervisor (see

How to Log in as Supervisor

on page 269):

From the main menu, select the path:

Default user settings

Default imprint

parameters

Default rate

299

| Page 299 | | Apr-15-2022 12:02 |

Configuring

your

Mailing

System

Summary of Contents for iX-7PRO Series





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands

quadient iX-7PRO Series, User Manual

Search results

Summary of Contents for iX-7PRO Series

Reviews:

Related manuals for iX-7PRO Series

Brands by name

Popular brands