quadient IX-7 User Manual Download Page 59

Page: 59 / 380

Enter the weight (in

) and press

[OK]

to validate.

Press

to return to the home screen.

The home screen displays the Manual Weight Entry icon (

) and the weight

entered.

How to Set [Received] Mode printing

This section describes how to use the [Received] type of imprint, to:

• Print the date on incoming mail.

• Print 'Received' on incoming mail.

You must begin with selecting the Type of imprint to gain access

to the corresponding parameters and be able to run mail.

Required settings:

| Page 54 | Jun-22-2021 11:01 |

Processing

Mail

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands