quadient IX-7 User Manual Download Page 359

Page: 359 / 380

Lift the metal retainer to remove the sponge.
Remember its direction.

Clean the sponge and the brush.

Re-install the sponge and retainer.

Put the brush back and push the release lever back down until it snaps into place.

Push down on the upper drive assembly until it locks back into position.

The Weighing Device does not Weigh Properly

If the Base does not display a correct weight, complete the following actions to correct

the problem.

Display

indicates a weighing error. When this weighing error

occurs on the home screen, the Standard Weighing type is

automatically selected if the Automatic Weight Detection is

activated, see

How to Activate/Deactive the Automatic Weight

Detection on the WP

on page 256.

You have to check the weighing device (Weighing Platform or Dynamic Scale) as

follows.

Actions

Possible causes

354

| Page 354 | Jun-22-2021 11:01 |

Troubleshooting

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands