quadient IX-7 User Manual Download Page 356

Page: 356 / 380

Machine Issues

13.1

How to Clear Mail Jammed in the Base

Envelopes are jammed (stopped) in the transport mechanism of the Base.

• Mail piece is too thick.

• Mail size is incorrect.

To clear mail jammed in the Base:
1.

Pull the release handle located underneath the base to lower the transport belts

and wheels. Hold the handle.

The release handle lowers the rollers to enable the user to clear any jams.

Using your other hand, remove the jammed envelopes.

Release the jam release handle to put the transport belt and wheels back in

position.

351

| Page 351 | | Jun-22-2021 11:01 |

Troubleshooting

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands