quadient IX-7 User Manual Download Page 106

Page: 106 / 380

Put the complete stack of items on the Weigh Platform and press

[OK]

The total number of items is displayed.

How to Fill the Automatic Label Dispenser

The Label Dispenser allows you to print postage on precut labels.

To fill the Label Dispenser:
1.

Stack the labels and insert them in the dispenser, face to print on the right-hand

side and peel-off tab on the top.

Push the block of labels down until you feel the label “click” into position.

The Label Dispenser can hold up to 40 labels.

Processing

Mail

101

| Page 101 | Jun-22-2021 11:01 |

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands