quadient iX-5 Series User Manual Download Page 180

Page: 180 / 328

Available Reports

8.2

How to Generate the Account Report

• This report displays the list of accounts in the mailing

system.

• To generate this report: You have to be logged in as a

supervisor and the current "Account Mode" has to be

"Account" or "Account with access control".

• Report output is printer or USB memory key.

To generate the Account Report:
1.

As supervisor (see

How to Log in as Supervisor

on page 207):

From the main menu, select the path:

Account management

Select

Manage Account

Select

Account Report

175

| Page 175 | | Jun-21-2021 12:11 |

Reports

Summary of Contents for iX-5 Series









































































































































































































































































































































Search results

Summary of Contents for iX-5 Series

Reviews:

Brands by name

Popular brands

quadient iX-5 Series, User Manual

Search results

Summary of Contents for iX-5 Series

Reviews:

Brands by name

Popular brands