quadient iX-3 Series User Manual Download Page 119

Page: 119 / 296

How to Change a Shared PIN Code

If you want to prevent unauthorised use of the Mailing System

and do not want to use accounts, use the “No Account with

Access Control” mode. This provides a single PIN code for all

authorised users.

From the home screen:

Press

and select the path:

Account Management

The Login screen is displayed.

Enter the Supervisor PIN code and press

[OK]

Select

Change PIN code

The Change machine PIN code screen is displayed.

114

| Page 114 | Jun-21-2021 09:24 |

Accounts

and

Access

Control

Summary of Contents for iX-3 Series









































































































































































































































































































Search results

Summary of Contents for iX-3 Series

Reviews:

Related manuals for iX-3 Series

Brands by name

Popular brands

quadient iX-3 Series, User Manual

Search results

Summary of Contents for iX-3 Series

Reviews:

Related manuals for iX-3 Series

Brands by name

Popular brands