quadient IS-420 User Manual Download

Page: 152 / 220

Zeroing the Weighing Platform

You can reset the Weighing Platform in the following ways:

• Set to zero: resets the weight to zero.
• Tare: sets the weight to zero with an additional tray on the Weighing Platform.

To zero the Weighing Platform quickly, press and maintain

the

key until the weight is reset to zero.

How to Reset the Weighing Platform (as a User)

To reset the Weighing Platform as a user:
1.

As a user:

Press

and select the path:

Batch Settings

Reset WP

Remove all items from the Weighing Platform.

Press

[OK]

to reset the Weighing Platform.

Press

[OK]

when Weighing Platform reset successful.

How to Tare the Weighing Platform (as a User)

To tare the Weighing Platform as a user:
1.

As a user:

Press

and select the path:

Batch Settings

Tare WP

Place the item you want to use on the Weighing Platform.

Press

[OK]

to tare the Weighing Platform.

Press

[OK]

when Weighing Platform Tare complete.

Configuring

your

Mailing

System

147

| Page 147 | Jul-24-2023 01:59 |

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands