quadient IS-420, User Manual

Page: 138 / 220

Settings Overview 8.1
This section describes two types of settings that are available on your system:
• User settings : That only last as long as the user who applies them is logged in.
• Supervisor settings : Set the default or permanent settings of your Mailing System.
Other user settings are described in the corresponding sections:
Processing Mail on page 27, Maintaining your Mailing System
on page 177, etc.
User Settings
The user settings described in the sections below are:
• Setting the display language
• Adjusting the screen contrast
• Enabling/disabling key beeps and warning/error beeps
Supervisor Settings
Your Mailing System has one supervisor PIN code that allows you to configure the
default settings and perform other functions such as managing accounts and access
rights, generating certain reports, etc.
The Supervisor PIN code of the system has been provided to
your organization in a separate distribution.
The supervisor settings allow you to:
• Change the default user settings.
• Modify system time-outs.
• Set credit warnings (high amount, low credit).
• Define a default weighing method for mailing, and calibrate the weighing devices.
• Design a default imprint (rate, text, slogan) and set a default printing offset.
• Enter connection parameters.
133
| Page 133 | | Jul-24-2023 01:59 |
8
Configuring
your
Mailing
System