quadient IS-350 User Manual Download Page 61

Page: 61 / 212

How to Add (or Cancel) a Text on the Imprint

To add a text to the imprint, or to cancel the text:
1.

Either:

Press

and select the path:

Imprint

Press

Select

Text

and press

[OK]

The Select text screen is displayed.

Select the desired text in the list or select

None

for printing no text.

The

icon indicates the current selection.

Press

[OK]

to validate your selection.

The Imprint screen is displayed with updated parameters (home screen: press

See also:

•

Managing Custom Text Messages

on page 166.

How to Add (or Cancel) a Slogan on the Imprint

To add an slogan to the imprint or cancel the slogan:

| Page 56 | Jul-24-2023 01:56 |

Processing

Mail

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands